DWA Banner Stand Assembly

  1. Screw top holder onto pole using knob
  2. Slide bottom holder onto large diameter pole and secure with knob
  3. Screw pole onto base using Phillips head screw
  4. Align top of banner to top dowel holder on the banner stand and slide each half of the dowel into each side of top pole pocket of banner until only finials show
  5. After top pole w/banner is in place.  Slide bottom holder up and insert dowels into bottom pocket using the same method as in step 4.
  6. Pull bottom holder down until banner is taut, but not too tense.  That's it!